Nuke Proof Generator - Втулки задние UABike | Велосипед как образ жизни

Nuke Proof Generator

  • Характеристики

    Класс: Даунхилл, Фрирайд, Олл-маунтин, Дёрт, Кросс-кантри
    Кластер звёзд: Кассета
    Материал: Фрезерованный алюминий 7075
    Подшипники: Закрытые промышленные: 6902 4 шт.; 15268v 1 шт.
    Ширина‚ мм: 135
    Количество спиц: 32
    Крепление диска: 6 болтов
    Год выпуска: 2007
    Цвет: Чёрный
    Цена‚ $: 139.21
    Вес‚ гр.: 305

    The 7075 Alloy main hub body has been cold forged for optimum strength and fatigue resistance with extensive CNC machining to shave off any unnecessary weight without compromising strength.
    The Rear 135 QR has been designed to fit frames with a 135mm hub spacing. Built to be strong enough for DH but still light enough for XC. This hub features a total of five sealed cartridge bearings with two on the drive side to help spread the loads of pedalling forces through the hub and one on the non-drive side with a further two in the freehub body. A low friction seal between the bearings and freehub body eliminates contamination of the bearings from ingress of water and dust.

    These hubs feature 6 pawls with leaf springs which are located in the main hub body for ease of maintenance. These engage into a 30 tooth steel ratchet which is located in the Alloy freehub body for additional strength and increased leverage ratio which provides positive engagement and super fast pick up for increased acceleration.

    The alloy cassette carrier has been cold forged with extensive CNC machining to exacting tolerances and features a hard anodized finish for durability and strength.
    Weighing in at a measly 305g these hubs weight belie their true pedigree. Who says strong has to be heavy!


        * Alloy freehub body with 30T steel ratchet
        * 6 Pawls with leaf springs
        * 4 x Sealed 6902 & 1 x sealed 15268v bearings
        * 67mm flange diameter
        * 34.5mm Non-drive side Centre-To-Flange diameter
        * 19mm Drive side Centre-To-Flange diameter
        * 15.3mm End of axle to disc mount face


    Ось‚ мм:
    Подшипники: Закрытые промышленные: 6902 4 шт.; 15268v 1 шт.
    Цена‚ $: 139.21
    Вес‚ гр.: 305
    Ширина‚ мм: 135
    Generator 135x12

    Ось‚ мм: 12
    Цена‚ $: 159.10
    Вес‚ гр.: 300
    Ширина‚ мм: 135
    Generator 150x12

    Ось‚ мм: 12
    Подшипники: Закрытые промышленные: 6902 5 шт.; 15268v 1 шт.
    Цена‚ $: 178,99
    Вес‚ гр.: 330
    Ширина‚ мм: 150

Где можно купить
  • Магазин
  • Описание
  • Стоимость
  • Пока не добавленно магазинов продающих этот товар
  • Нет комментариев
Добавление комментария
Обновить код
Ближайшие события